|
|
|
The NT8’s liquid lines have to be sterilized to discourage the growth of mold, fungus, and other undesirable elements that can thrive in an aqueous environment. You will need 10 L deionized water, 5 L 40-50° C water, and 250 mL sodium hypochlorite (NaClO). You will need approximately 45 minutes of time to complete this procedure.
Click the Support button 
on the toolbar and select NT8 Sterilization Wizard.
Note: You must complete the entire procedure before dispensing experiment plates again. If you have any questions or concerns, please contact support@formulatrix.com before commencing. Please wear suitable lab safety gear during the entire process.
|
|
|
NTC-V28R016
|