Open topic with navigation

Replacing 3A Fuse

The 3A fuse ensures the safety of the electrical flows powering the FLO i8 system. If you encounter power disconnectivity, you might need to replace the fuse. The FLO i8 accessory kit box includes 2 spare 3A fuse. Follow the steps below to replace the fuse on the connection panel.

Prerequisites:

• You have powered off the instrument.
• You have disconnected the power cord from the instrument.

Required Parts:

• 2 pcs of 3A FUSE (250V, UL SLO-BLO, 5x20 mm)

Required Tool:

• A pair of tweezers

To replace 3A fuse on the connection panel:

1. Locate the connection panel at the back-left of the instrument.

   

   The Connection Panel

2. Locate the fuse drawer in between the power button and power socket.

   

   The Fuse Drawer

3. Take out the drawer from the connection panel by sliding the tweezers’s tips to the holes as seen in the image below.

   

   Removing the Fuse Drawer

4. Remove the broken fuse at the back of the drawer. Then, replace them with the new ones.

   Note: You can install the 3A fuse in the drawer in any position.

   

   Removing the 3A Fuse

5. Place the drawer back to the connection panel.

   

   Placing the Fuse Drawer

6. Plug the power cord back to the connection panel. Then, turn on the instrument.

FLOWH-V27R124	Unit 6, Level 13, Gate District, Gate Building Dubai International Financial Centre Dubai, United Arab Emirates   +1-781-788-0228 support@formulatrix.com publications@formulatrix.com