The status bar, located at the bottom of the MANTIS software, gives you up-to-date information about what's going on with your MANTIS. If you have the LC3 hardware, the indicator box for the instrument will automatically appear. The status bar is divided into several sections, as shown below.
Status Bar
The icons in the indicator box vary depend on the MANTIS hardware models used by user. The indicator box will appear as either green, yellow, or red. If the indicator box is green, the MANTIS software is connected to the MANTIS hardware. Yellow means that you are operating in simulation mode, which means any actions taken in the software will not affect the hardware. Red means that the software is not connected to the hardware.
Tip: You can enter simulation mode by clicking the indicator box.
The RFID Status Indicator appears green when the MANTIS is equipped with RFID and the RFID reader is ready.
Important: If the RFID status indicator appears red, it means that there is an error on the reader. Report this issue by emailing support@formulatrix.com.
 | |
| MAC-V40R218 |