Manual Mode

Manual mode is used for manual inspections or manual imaging. When ROCK IMAGER is in Manual Mode, it suspends the automatic imaging schedule(s).

To switch to enter Manual Mode, go to the Scheduling menu and select Manual Mode. You can either tell ROCK IMAGER to return to Automatic Mode after a set period of time, or stay in Manual Mode until you go to Scheduling and select Automatic Mode.

Note: If you are inspecting a plate, be aware that leaving the Live Image on for an extended period of time can cause thermal decomposition to your samples.

 

Related Topics


RIC-V38R119

10 DeAngelo Drive

Bedford, MA 01730

USA

 

+1-781-788-0228

support@formulatrix.com

publications@formulatrix.com