Install the LCP syringe by inserting it into the LCP holder slot.
Push the LCP syringe to make sure it is firmly attached to the syringe holder.
An LCP dispensing attachment is available for the NT8 that can dispense LCP drops of 50 - 100 nL. The dispenser uses an 8 mm barrel syringe. A sensor ensures the syringe is properly mounted before the NT8 begins dispensing drops. To install the LCP attachments, you'll need to locate the LCP syringe, which are included in the NT8 LCP accessory kit.
This page covers the following section:
Before you perform the LCP drop dispense, you'll need to install the necessary parts. To install the LCP syringe, take the following steps:
Install the LCP syringe by inserting it into the LCP holder slot.
Push the LCP syringe to make sure it is firmly attached to the syringe holder.
Installing the LCP Syringe on the LCP Syringe Mount
After the plunger has been inserted, tighten the thumb screw by turning it clockwise.
Tightening the Thumbs Screw
Note: You can adjust the lever speed and height to fit the LCP syringe by clicking 
on the toolbar and moving the lever button on the NT8's head up and down.
 | |
NTC-V28R719
|