On the Home Screen, tap the SEQUENCE RUNNER menu.
The PULSE Home Screen
Select ADD NEW.
Tap on the cycle card and select one of the cycles accordingly. Then, click CONTINUE.
Selecting a Cycle in the Select Cycle Window
Note: If the cycles you've chosen are not in the correct order, press and hold the grip indicator on the left side of the cycle card to move the cards.
Pressing and Holding the Grip Indicator
Then choose from the following options:
-
To repeat the cycle, tap the CYCLE button and type the desired repetition number. The value for the cycle must be at least 1 but not more than 1000.
OR
-
To assign a certain period of time (in minutes) for your cycle, tap the MINUTES button and type the cycle time. The value must be at least 0.01 but not more than 100.
The Cycle and Time Settings Box
Set the pressure by toggling HI or LO.
Note: Priming, Air Recovery and Buffer Recovery cycles work best in low pressure whereas Concentrating and Buffer Exchange cycles work best in high pressure.
OPTIONAL: Tap the Settings
button to configure the cycle.
The Cycle Settings
OPTIONAL: To repeat the sequence, fill in the number of repetition(s) in the REPEAT ALL option.
Tap RUN.
Running a Sequence
Once the sequence has finished, tap the back arrow
to exit the SEQUENCE RUNNER and return to the Home Screen.
Sequence Completed
