The Load Port sub-tab, found on the Plates Tab, displays data about the plates in the load port, assuming they have already been scanned.
Note: You will only see the Plates tabs and its sub-tabs if you have Rock Imagers 1000, 182 or 54.
Rock Imager 1000 Load Port tables
If you right-click on a plate name on any of the sub-tabs, you can:
View information about a plate by selecting Plate Information.
Scan the barcode plate by selecting Hand Scan.
Image a plate immediately with its default imaging setting by selecting Image Plate.
Image a plate immediately with a custom imaging setting by selecting Image Plate Using.
Tag certain drops as interesting in Rock Maker and wish to image only those drops with its default imaging setting by selecting Image Interesting Drop(s).
Tag certain drops as interesting in Rock Maker and wish to image only those drops with a custom imaging setting by selecting Image Interesting Drop(s) Using.
Reset drop location positions by selecting Clear Drop Location Positions.
Move the plate to the load port, storage, or a specific type of imager by selecting Move Plate to.
|
|
| RIC-V30R016 |