Post-Bleach options
The FRAP Post-Bleach options are available on the FRAP Benchtop Rock Imager or Rock Imager 1000 with a FRAP imaging method option. To support your imaging performance, FRAP Configuration provides some optional settings such as High Throughput (HT) and Full Recovery. To configure these settings, on the File menu, click FRAP Configurations, and click Post-Bleach.
Post-Bleach options
HT FRAP Post-Bleach OptionsEnables you to specify specific delay time (in seconds) before FRAP captures images of your drops after the bleaching process is complete.
Full Recovery FRAP Post-Bleach OptionsIn Full Recovery FRAP post-bleach Options, you can choose and set some optional points such as Acquire images at fastest rate for, Interval, and Post-bleach imaging time.
| Option | Description |
|---|---|
| Acquire images at fastest rate for | This setting defines how long, in seconds, the imager will take rapid pictures of your drop after laser bleaching is complete. |
| Interval | The number of intervals (in seconds) that will be used when taking additional images after the initial imaging process is complete. |
| Post-bleach imaging time | The number of seconds post-bleach imaging will take given the settings you configured on this tab. |
|
|
| RIC-V33R116 |