You are here: Designing Dispenses : Tutorials : Recovering Excess Reagent Volume

Recovering Excess Reagent Volume

The reagent recovery process pushes the reagent out of the chip into the input tube or pipette tip. Run Reagent Recovery when you want to conserve reagent volume.

Note: For the Continuous Flow (CF) chips, you can determine the recovery duration, enable the double recovery setting, and determine the delay time between two recoveries. For more information, see Input Control Panel.

Prerequisites

You have executed a plate dispense.

To recover reagent volume from all inputs:

Click the Recover All Inputs button .

To recover reagent volume from individual inputs:

Right-click on a reagent in the Device Control panel and select Attach Input to Hand.
Click the Recover Input button .

Important: We recommend that you wash the chips after each use, see Cleaning the Chips for further details.

Recovering Excess Reagent Volume

Prerequisites

To recover reagent volume from all inputs:

To recover reagent volume from individual inputs:

Related Topics