You are here: Designing Dispenses : Tutorials : Recovering Excess Reagent Volume

Recovering Excess Reagent Volume

The reagent recovery process pushes the reagent out of the chip into the input tube or pipette tip. Run Reagent Recovery when you want to conserve reagent volume.

Note: For the Continuous Flow (CF) chips, you can determine the recovery duration, enable the double recovery setting, and determine the delay time between two recoveries. For more information, see Input Control Panel.

 

Prerequisites

 

To recover reagent volume from all inputs:

 

To recover reagent volume from individual inputs:

  1. Right-click on a reagent in the Device Control panel and select Attach Input to Hand.

  2. Click the Recover Input button .


 

Important: We recommend that you wash the chips after each use, see Cleaning the Chips for further details.

 

Related Topics


MAOWH-V48R824

Unit 6, Level 13, Gate District, Gate Building

Dubai International Financial Centre

Dubai, United Arab Emirates

 

+1-781-788-0228

support@formulatrix.com

publications@formulatrix.com