Caution

Read all safety and operating instructions before operating the NT8. The following safety recommendations are basic guidelines. If the lab where the NT8 is to be kept has additional safety guidelines, they should be followed as well, along with all applicable national and international safety codes.

Warning

The NT8 is a complex electromechanical device. Only persons with the proper training should service or operate the product.

warning Make sure all NT8 power connections are properly grounded. Do not place the power lines, waste lines, or any other communication cables where they could cause a safety hazard.

warning Use only parts supplied or recommended by FORMULATRIX in this guide or via email.

prohibit Do not use extension cables unless approved by FORMULATRIX.

prohibit Do not remove or alter any safety labels, warnings, Equipment Identification labels, hazard, or the nameplate from any FORMULATRIX product.

prohibit Only FORMULATRIX personnel are permitted to transport, assemble, or service the NT8.

fire Arrange cables in accordance with the Technical Standard for Electric Properties and Extension Rules or fire may occur.

lighting Turn OFF all power sources before removing connectors or electric shock may occur.

fire Avoid damage to the power cables. Do not apply unnecessary stress, place heavy objects on, or crush the cables or fire may occur.

warningyellow The NT8 must always be unplugged before servicing, or injury may result from the automatic operation of the equipment. Make sure your hands are dry when plugging or unplugging the NT8.

important Only fill the water carboy with filtered water. Avoid using water with high mineral content, such as ionized alkaline, ground, acidulated, geothermal, or mineral water.

Related Topics