Requirements

Placement

The NT8 should be placed in a location that meets all of the following conditions, to ensure your safety.

  • The NT8 should be placed on a solid, flat surface that has dimensions of at least 120 cm (47.2”) wide by 80 cm (32.5”) long.

  • Keep the instrument and cord away from heated materials.

  • The water carboy should be placed beside or behind the NT8, on the same level as the NT8 instrument.

  • The waste carboy should be placed under.

Below are the acceptable environmental parameters for NT8 storage and operation.

Ambient Temperature Range

4 °C to 30 °C

Operating Humidity

0 - 95% non-condensing

Storage Humidity

0 - 95% non-condensing

Electrical Requirements

  • 110 V - 240 V, 50 Hz - 60 Hz, 130 W typical, 200 W max

  • Standard or European electrical outlet

warningyellow Confirm that the power supply requirements are properly met to avoid material damage and fire.

important The power supply for the system must meet or exceed electrical requirements of the system to avoid damage and risk of fire.

System Requirements

To use NT8, your computer must meet the following minimum requirements.

Note

If you need further assistance related to the system requirements, please contact support@formulatrix.com.

NT8 4.3

Minimum

Recommended

Operating System

Windows 7 32-bit

Windows 11 64-bit

Processor Speed

Dual Core 1.8 GHz

Dual Core 3.6 GHz

RAM

1 GB RAM

4 GB RAM

Available Hard Disk Space

1 GB

2 GB

Screen Resolution

1360 x 768 pixels

1920 x 1080 pixels

.NET Framework

4.5

4.5

FTDI Driver

Version 2.8.24

Version 2.12.28

Open USB port

1

1 per NT8 instrument connected to your computer

Related Topics